Industrial Application – All Cleaning Products

• Fast and thorough dissolving action - One step action does the job
• Dissolves cement and scale very quickly with the selective inhibitors protecting metal surfaces
• Easy to use
• Economical to use - versatile and multipurpose

Available in: 5L, 20L cans or 200L drum

Pls. refer to MSDS for more information and safety instructions.

• Biogard incorporates ingredients that is highly effective against pseudomona.
• Biogard has residual effect thus stays effective long on the surface.
• It has strong penetration, emulsifying, soiling dispersion, and deodorizing abilities.
• Biogard is non-perfumed.  It does not musk odor, rather it eliminates the micro organism that causes foul odors.
• Biogard has very low mammalian toxicity.
• Dilutable and fully miscible in water hence also totally biodegradable.

Available in; 5L, 20L can or 200L drum

Pls. refer to MSDS for more information and safety instructions.

Cleans, disinfects and deodorizes hard non-porous surfaces in one step with no rinsing necessary.

• Hospital grade disinfectant
• Safe versatile & easy to use
• Disinfects hard surfaces
• Fast acting, kills mold, mildew, and fungi
• Eliminates unwanted odor
• Safe for food contact surfaces
• Safe for use on organics
• Eliminates the risk of chlorine use that produces dangerous levels of toxic chlorinated by-products
• Environmentally safe
• EPA registered germicide 

Instructions for Use:

1. Dissolve tablet in tap water according to concentration required to the disinfection solution.
2. Give the solution 3 minutes activation period before using. The solution must be consumed within 8 hours.
3. Use the solution by spraying or ULV Cold fogging.
4. Aim the spray nozzle and/or the fogger nozzle directly to the target area to disinfect.
5. Added volume of solution do not increase the potency of the disinfecant so do not repeat over the same area in every application to avoid wasting the disinfectant.
6. Contact time is 7 - 8 minutes.
7. No need to rinse.

Concentration Table:

Also available in: Pouch x 50, 500 (1mg Tab); Pouch x 25 (20mg Tab); Powder - Pouch 1Kg

(Pls. refer to PTI and MSDS for more information and safety instructions.)

• Removes double-sided tapes and chewing gum from carpets, fabrics, seat covers, wood or paint coated & laminated surfaces;
• Slow evaporating - acts deep in between gum and surface resulting to easy and quick removal;
• Excellent solvency for removing corrosion inhibitors, temporary coatings, grease & soiling;
• Low vapor, no fumes, less toxicity.Safer than methyl ethyl ketone (MEK), toluene, xylene, and halogenated solvents.  Does not contain ingredients harmful to ozone;
• Does not contain halogenated or hazardous solvent;
• Easy to apply, user friendly.

Instructions for use:

1. Transfer Gum remover to an adequate spray bottle.
2. Spray the solution directly into the adhesive or gum and allow to soak for about 2 minutes.
3. Scrape the adhesive or gum with a plastic scraper.  Wipe with non-metallic scouring pad.
4. Clean with Aventec Multipurpose cleaner if necessary.

(Please refer to MSDS for additional information and safety instructions.)

• Based on balanced blend of alkalies and water hardness sequestering agents.
• Ensures low water hardness ion concentration
• Prevents precipitation of detergent components and fabric discoloration.
• Enhances soil removal from heavily soiled fabrics

(Please refer to PTI & MSDS for additional information and safety instructions.)

Also available:

ALC 1896.2.20 (20L can)

ALC 1896.2.5  (5L can)

• Drain Opener cuts through water, grease, and hair to unclog drainage system faster.
• Fast and thorough dissolving action.
• Hydrolyzes protein as those found in hair that may block pipes.

Available in: 5L, 20L can

Pls. refer to MSDS for more information  and safety instructions.

• Suitable for hand and machine washing;
• Does not cause any discoloration on fabrics
• Provides anti-static properties to the fabric enhancing a luxurious supple feel to all types of fabric.
• Antibacterial properties sanitizes the fabrics.

(Pls refer to Prod. Techl, Information sheet and MSDS for additional information & safety instructions)

• Removes fats, grease, carbon charring from oven grills, hoods & deep fryers
• Cleans ash trays, baking moulds 
• Specifically designed to give quick results

Available in:  5L, 20L cans

•  Releases oxygen @ 70º- 90º C allowing better stain removal.
•  Safe to use on all types of fabrics, whether coloured or white
•  Free rinsing
•  Suitable for both soft water and hard water
•  Does not damage the fabric due to accidental spillage
•  Concentrated and economical to use
•  Environmental friendly

(Pls. refer to Product Technical Info sheet & MSDS for additional information and safety instructions.)

• Excellent dirt removing properties.
• Removes carbon deposits, oil, and grease from all types of fabrics
• Safe on all washable fabrics at various concentrations and dilutions.
• Pleasant fragrance (also available without fragrance).

Also available in:

ALC 1895.2.20  20L can (industrial use)

ALC 1895.2.5  (Domestic Use)

(Please refer to PTI & MSDS for addional information and safety instructions)

• Excellent dirt removing properties.
• Removes carbon deposits, oil, and grease from all types of fabrics
• Safe on all washable fabrics at various concentrations and dilutions.
• Pleasant fragrance (also available without fragrance).

Also available in:

ALC 1895.2.5  (Domestic Use)

ALC 1895  200L can (Industrial use)

(Please refer to PTI & MSDS for addional information and safety instructions)

• Excellent dirt removing properties.
• Easily removes carbon deposits, oily and greasy deposits from all types of fabrics.
• Pleasant fragrance
• Safe on all washable fabrics in various concentrations and dilutions.

(Please refer to Product Technical Info Sheet & MSDS for addional information & safety instructions)

• High sequestering properties make it equally effective in both soft and had water
• Provides maximum stain and scale control
• Low foaming, free rinsing, and readily miscible in water
• Non-chlorinated, easy on stainless steel and brass

Also available in: 200L drum

(Please refer to MSDS for additional information & safety instructions)

• As a Release Agent - highly effective when applied to rubber molds. Provides a very uniform thn coating, ideal for routine mold release operations.
• As a Dry Lubricant - best for all applications; 
• Thermal Stability: PTFE has excellent high temperature properties up to 580°F/304°C
• Chemical Stability:Completely resistant to concentrated nitric acid, concentrated hydrochloric acid, 30% acqueous sodium hydroxide, and 30% alcoholic potassium hydroxide at temperatures of 212ªF/100ªC.
• No Migration:  PTFE release agents contain no silicones which can show up unexpectedly as oily residue in other work areas.
• Minimal Transfer:  Transfer of mold release to molded parts is negligible, minimizing interference with post finishing operations such as painting, bonding, o metalizing.
• No gumming.

Approvals: NSN 9150-01-528-5624.none

Available in: 397gms (14 Oz)

• Fast acting, builds up a stable foam that lifts and dissolves grease, grime & dirt
• Qualified and safe to use for aircraft, yachts, luxury liners, cars & home applications
• Cleans gently, does not affect fire retardant applied on aircraft carpets
• Anti-static property acts as grime & dirt repellent thus reducing frequent cleaning
• Helps untangle & restores pile body and bounce.
• Fully miscible in water; may be diluted depending on the soiling.
• Biodegradable, environment friendly, user- safe,does not emit toxic fumes

(Please refer to MSDS for additional information and safety instructions.)

• Low foaming water-based cleaning & degreasing agent.
• May be applied with high pressure sprayer, immersion or specialized ultrasonic bath.
• Safely removes heavy soiling such as grease, oil, grime, residue and environmental dirt.
• Does not attack steel, copper, brass, iron, non-ferrous metals, aluminum, titanium, magnesium, rubber or plastics. Pretests should be carried out for temperature and concentration prior to application.
• Can be used as a water based cleaner in non-destructive material testing.
•  Free from phosphates and complex agents and effectively neutralizes surfaces after paint stripping operations, i.e. aircraft.
• Non-flammable

• Forms an optimal corrosion protection film in the whole system and prevents sediment forming in the tubes
• Free from phosphor
• CANNOT be used in systems containing aluminium or aluminium alloys

• Infiltrates water and rusted parts due to its high capillarity and the very low surface tension
• Safely removes rusted and seized screws, bolts and nuts
• Removes rust and graphite and prevents squeaking

• Biodegradable
• Water miscible, dilutable in all ratio.
• Removes hard contamination and soiling
• Ideal for for cleaning industrial tools, machines, & equipments
• Reduced water usage in rinsing.

Also available in: 30Kg pail, 200Kg drum

Please refer to MSDS for more info & safety instructions.

• Rinses off easily without streaking even after drying on the surface
• Ideal for office buildings, factories, automotive garage and maritime vessels
• May be used by manual application or with automated high pressure equipment

Specifications and Approvals

Product Technical Information (PDF)